Login
Contact
Share :
Description
1. The entire 1+ series connector design has only two parts, one is the connector body and the other is the pressure screw. The clamping ring and the pressure screw are an integral injection molding design that can directly lock the connector, so there is no need the clamping ring and there will be no other parts falling off.
2. The built-in connecting sleeve and the tube thread are an integral injection molding design that will not be damaged or deformed by external forces.
3. It is very simple to operate the 1+ series connector. You can complete the seal by just tightening it with your hands without any tools. This design reduces the assembly time. If necessary, you can also tighten the pressure screw with a wrench because there is no narrow gap or dead corner in the middle.
2. The built-in connecting sleeve and the tube thread are an integral injection molding design that will not be damaged or deformed by external forces.
3. It is very simple to operate the 1+ series connector. You can complete the seal by just tightening it with your hands without any tools. This design reduces the assembly time. If necessary, you can also tighten the pressure screw with a wrench because there is no narrow gap or dead corner in the middle.
Related Products
4Z Series - Flow meter for gases and liquids
3K Series - PFA Quick Couplings
Connection Principle 2N
Connection Principle 1C
Manual Ball Valve 6L
Ball Valve with Pneumatic Actuator 6D
Injector 7G
Ball Valve with Electrical Actuator 6R
Electrical fine control valve 5E
You may also like
Small Vehicle BLDC Drive (CANBUS)
HKC Limit Switch Box Valve Position Monitor APL-910N
DC24V PVC electric butterfly valve Mini electric, DDD CO. is the most professional. Made in Korea and Taiwan. Dry contact heater is also available. All-aluminum alloy waterproof IP68 CE(TUV)
HKC Limit Switch Box APL310N
WMGD Series All-in-One Servo Drive Wheel Module
TS600R Pneumatic Actuated Ball Valve All STS316
DC Servo/BLDC Drive (RS485 Modbus)
1 Sec. Electric ball valve, stainless steel electric valve, DDD CO. the most professional. Made in Taiwan. Standard 4 Add.Limit Switches , heater, all-aluminum alloy waterproof Actuator
SMC EP Positioner IP8100
1LX-7003-ET 1LX-7001-ET Limit Switch
Dual Ouptut DC Servo/BLDC Drive (CANBUS / RS485 Modbus)
Ball Valve with Gear Box Operating (Made in Taiwan)
YT-1000L E/P Positioner
PVC Butterfly Valve with KLS10 Limit Switch Box Valve Position Monitor
E/P Positioner (Linear Type)
APL-210N Limit Switch Box / Valve Position Monitor
Explosion Proof Solenoid Valves
Automatic diaphragm control valve IP8000-031 IW215 Pneumatic diaphragm control valve Proportional control valve Pneumatic flow control valve (DDD CO. Taiwan)
PVC electric butterfly valve Mini electric, DDD CO. is the most professional. Made in Korea and Taiwan. Dry contact heater is also available. All-aluminum alloy waterproof IP68 CE(TUV)
DC Low Power BLDC Drive
VCX-7003-ET VCX-7001-ET Limit Switch
Dual Ouptut DC Servo Drive (EtherCAT)
Explosion Proof Solenoid Valves
W Series Multi-Model Servo Drive Wheel Module
APL-2N APL-3N APL-4N APL-5N APL-7N APL-8N APL-9N Valve Position Monitor
Highest Rated Products
AMR Robot
AI Master
FOBA F0100-ir 超快雷射雕刻系統
Multi-Axis Robot
M20W MINI fiber laser marking and engraving machine
AGS-7 Robot Polishing Station
collaborative arm
ATM3 3D Air Aurora Machine
HALCON
COMPACT ARM CAW SERIES
Elastomer Couplings
Bellows Couplings
Disc Pack Couplings
Torque Limiters
Line Shaft Couplings
Customized Couplings
Gear Couplings
ATEX Couplings & Torque Limiters
Xsmart On-Line XRF
ROBOT
Electric Gripper Series
AI NVH
Unitree Go2/ B2
Insole Pressure Sensor
R+W Germany Precision Coupling & Torque Limiter
particle extractor
Automatic welding equipment kit
Wet Dust Collector
AI Machine Vision Cameras System
Collaborative Robot HC Series
Back
Product Inquiry