Login
Contact
Share :
Description
1. Use PMW to control the motor input voltage and adjust the motor speed. (0-24V proportional display)
2. It can accurately set the time for the motor to turn the glue out-it is used when playing a single point and the length of the random station signal is used for pulling (continuous) operation
3. The motor can be set to reverse and suck back for a set time after the end of the forward rotation-the glue breaks early to reduce the wire drawing phenomenon.
4. Use a medium pressure regulator (0-350 Kpa) and 2 sets of electronic pressure sensors with temperature compensation-the input pressure of the dispensing material can be adjusted accurately.
2. It can accurately set the time for the motor to turn the glue out-it is used when playing a single point and the length of the random station signal is used for pulling (continuous) operation
3. The motor can be set to reverse and suck back for a set time after the end of the forward rotation-the glue breaks early to reduce the wire drawing phenomenon.
4. Use a medium pressure regulator (0-350 Kpa) and 2 sets of electronic pressure sensors with temperature compensation-the input pressure of the dispensing material can be adjusted accurately.
Related Products
DV910 High pressure and large flow suction shaft dispensing valve
DV511 Zero-drip micro-dispensing needle valve
DV810 Quick release screw valve
DV610 Adjustable Glue Volume Diaphragm Valve
DV720 Screw Dispensing Valve
DV560 series micro small area needle nozzle spray valve
Highest Rated Products
Multi-Axis Robot
Elastomer Couplings
Bellows Couplings
Disc Pack Couplings
Line Shaft Couplings
Customized Couplings
Gear Couplings
ATEX Couplings & Torque Limiters
Level Detection
Ultrasonic Camera
Leakshooter1000 Ultrasonic leak detector Camera
Laser Alignment System
Vibration Accelerometer
Vibration Analyzer
DeCaIonTM eliminating scale, preventing corrosion and bio-fouling automatically Cooling water treatment system
Kuebler(Kübler) ·Condition Monitoring Sensor CMSVT38
Eliwell Electronic controllers compatible with flammable refrigerant gases
High-IP Fixed-mount barcode scanner
Stator Slot Cell Inserter - For Drone / Quadruped Robot Motor Production Line
Web資料傳輸組 ( MG ) ( 原 M-SYSTEM )
Thermax 5L、8L、10L ( TMCHallcrest )
PCB terminal blocks
Barrier terminal blocks
Spring connection
Screw connection
Interlock switches
Vandal resistant switches
Safety / Limit switches
Push-in switch
Φ22mm
Back
Product Inquiry