Torque Calibration System 0.05~1200Nm

★ Torque calibration system : ① + ② + ③
★ This series is made-to-order. The lead time is approximately 3 to 8 weeks, depending on material availability.
1. ①Torque Meter｜Rechargeable. A single torque meter can connect to various sensor models.
2. ②Desktop Torque Test Stand｜Available in three sizes to choose the appropriate stand based on the wrench's required length.
3. ③Torque Sensor｜Detection range from 0.05 Nm to 1200 Nm; select the corresponding sensor according to specific torque requirements.
4. Calibrate the torque wrench using a sensor to verify its accuracy.
5. Warning function : Beep, LED indicator. ( When reach the torque setting value 80%)
6. The backlight changes from blue to red, and the buzzer continues to sounds. ( When reach the torque setting value 101%)
7. Four torque units are available : N-m, ft-lb, in-lb, kgf-cm.
8. Can store 30 memory setting values.
9. Two modes : Track /Peak.
※※ Not for air wrench and electric wrench ※※
➤①Meter Content : User guide(Bilingual) x1, Type-C to C Signal Transmission Cable x1, USB to Type-C Charging Cable x1
➤②Test Stand Content : Open-end wrench x1 (for fixing the base), L-shaped hex wrench x1 (for fixing the sensor), Bubble level x1
➤③Sensor Content : Anti-shock tool box x1, Certificate of calibration report (Using ISO specification) x1

WEB: https://www.asmith.com.tw/en/products/Wrench/Torque_Calibration_System/WC

---