3M™ WR-TW-KO1000 High-Sensitivity Leak Detector

1. Indicator lights show status: green (power on); red (leak detected).
2. Sensitivity is adjustable.
3. Capable of detecting ultrapure water and certain photoresist liquids (when used with S-1F or B-3P).
4. Power supply options: AC 110V or AC 220V.
5. The open voltage between electrodes (detection tape) is below 19V, using a weak current and is very safe.
6. Equipped with two output contact sets (2C).
7. After leak detection, reset by turning the knob to the “LOW” point.
8. CE certified.

---